FAQs

Our batteries are safe. All Etekware Batteries use the safest and most stable components, including a LiFePO4 cathode and a built-in Battery Management System (BMS). The BMS protects the cells against excessively high or low voltages, high currents, short circuits, and excessive heat or cold. These are the most common causes of battery failures, and we have taken every precaution to mitigate these risks in all of our batteries.

LiFePO4 battery life is 10 times longer than that of a lead-acid alternative. Even when charging and draining LiFePO4 batteries once each day, LiFePO4 technology offers more than 13 years of life, while the competition lasts less than two years.

Etekware batteries area unit ordinarily used for Marine, Recreational vehicles, Golf Cart applications, CCTV, robotics, PV energy storage, etc. Etekware Battery is used for any system or application that will unremarkably use a Lead-acid battery (AGM, GEL) in 12V, up to 48V. After removing your previous batteries, place the Etekware battery within the same means. you will use equivalent cables to reconnect the Etekware battery.

Typically, LiFePO4 batteries are about a quarter of the weight of lead-acid batteries. What does this mean for your LiFePO4 battery applications? You aren’t weighed down by heavy lead-acid batteries, allowing your vehicles to run at a higher speed and with more efficiency.

LiFePO4 batteries are easily recyclable, and since they only need to be replaced about once a decade, you’re cutting down on waste produced. LiFePO4 technology is compatible with solar applications, and you may also choose to buy a battery made from recycled material.

LiFePO4 technology offers 100 percent charging efficiency, drastically reducing the amount of time you must wait for your battery to charge. Lead-acid batteries average a charging efficiency of 85 percent. Unlike lead-acid batteries, lithium doesn’t need to go through the time-consuming absorption phase, which provides the final 20 percent of power during charging. Lithium receives a full charge in a fraction of the time.

Unfortunately, lead-acid batteries deteriorate unless you charge them every day. Lithium maintains most of its usable capacity even if you store it without charging for a year. For optimal protection, experts recommend storing LiFePO4 batteries at 50 percent depth of discharge (DOD).

The short answer is virtually none. While lead-acid batteries must go through routine saturating charges lasting 14 hours or longer, LiFePO4 technology maintains consistent power even if you only charge it partially. However, extreme temperatures may damage your battery, and you should take care to charge it at the right voltage. 14.6 V is the recommended charging voltage.

The Etekware merchandise is designed around AN assembly of sealed cells. there’s no risk of solution leak. the full of the block cells and embarked natural philosophy is firmly fastened within the battery casing. All our batteries may be placed in any position (tilted or lying). there’s no obligation to put in the upright, as for the standard batteries in Lead/AGM.

LiFePO4 batteries are customizable for your energy needs, making it easy to switch from lead-acid batteries, regardless of the type of vehicle.